Wave Music Home
ReleasesCommunityYour OrderWave Music
ArtistsEventsDJ MixesShop

Wave Music Home


Home
About Us
Labels
Distributed Labels
Links




Search


Adv. Search



Subscribe


Email






Go Back   Wave Music Community Board > Tech Talk for Gearheads > Sound Installers and Manufacturers

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 04-12-2013, 11:44 AM
SBS Designs SBS Designs is offline
Registered User
 
Join Date: Jun 2012
Posts: 64
SBS Designs SX-3 2way 3way dual mono xover

I wanted to post some info on my new Design that I am bringing to market called the SX-3.

The SX-3 is a 2 way 3 way Dual mono Analog X-over designed for Recording studios & any pro application.

The SBS Designs SX-3 is 1RU & features 12 front panel user controls.

3 gain controls for each band & Channel
2 Frequency choice pots for narrow & wide settings that are sweepable.
A Phase pot to adjust the phase from low band to the mid/mid high band if applications have phase issues on each channel.

If you use the SX-3 in 2 way mode the high out is independent so you can go to a high freq device have selectable freq and gain control this will NOT band limit the mid driver in 2 way mode, so your horn will still go up all the way.

The pic posted is a Pre production Prototype,

The SX-3 I/O XLR Bal and RCA unbalanced ins and outs.

SX-3 Internal info:
859 Solder Pads
606 Component Interconnecting Traces
301 Individual Through Hole Components.
115v 230v selectable on rear panel

The SX-3 has been secretly under wraps and in development for well over 2 yrs, and is now FINALLY coming to market.

Serious listening tests will be done on the Annabella A4H loudspeakers & MANY high end studios.

The All new SBS Designs SX-3 has a 10 yr warranty, The Release date, sometime 2013.
sales@sbsdesigns.com

Specs & Results coming soon!
Attached Thumbnails
Click image for larger version

Name:	SX-3 front panel2.jpg
Views:	271
Size:	32.4 KB
ID:	3196  Click image for larger version

Name:	SX-3 rear I:O.jpg
Views:	222
Size:	30.6 KB
ID:	3197  
Reply With Quote
  #2  
Old 04-12-2013, 02:57 PM
SBS Designs SBS Designs is offline
Registered User
 
Join Date: Jun 2012
Posts: 64
Here are 2 shots

Quote:
Originally Posted by SBS Designs
I wanted to post some info on my new Design that I am bringing to market called the SX-3.

The SX-3 is a 2 way 3 way Dual mono Analog X-over designed for Recording studios & any pro application.

The SBS Designs SX-3 is 1RU & features 12 front panel user controls.

3 gain controls for each band & Channel
2 Frequency choice pots for narrow & wide settings that are sweepable.
A Phase pot to adjust the phase from low band to the mid/mid high band if applications have phase issues on each channel.

If you use the SX-3 in 2 way mode the high out is independent so you can go to a high freq device have selectable freq and gain control this will NOT band limit the mid driver in 2 way mode, so your horn will still go up all the way.

The pic posted is a Pre production Prototype,

The SX-3 I/O XLR Bal and RCA unbalanced ins and outs.

SX-3 Internal info:
859 Solder Pads
606 Component Interconnecting Traces
301 Individual Through Hole Components.
115v 230v selectable on rear panel

The SX-3 has been secretly under wraps and in development for well over 2 yrs, and is now FINALLY coming to market.

Serious listening tests will be done on the Annabella A4H loudspeakers & MANY high end studios.

The All new SBS Designs SX-3 has a 10 yr warranty, The Release date, sometime 2013.
sales@sbsdesigns.com

Specs & Results coming soon!

The 1st attachment the Waveform is the low and mid freq superimposed together.This shows it the waveform perfectly in phase after adjusting phase control.

What if speakers or room have phase issues?
See the 2nd pic attached to see how much phase shift the SX-3 can offer if needed for speakers or room issues.

No instruments needed, just turn phase knob until low to mid transition sounds the fullest, its that simple.

sales@sbsdesigns.com

SX-3 Coming sometime in 2013

www.sbsdesigns.com
Attached Thumbnails
Click image for larger version

Name:	1.jpg
Views:	189
Size:	83.1 KB
ID:	3198  Click image for larger version

Name:	2.jpg
Views:	185
Size:	83.8 KB
ID:	3199  

Last edited by SBS Designs : 04-12-2013 at 03:00 PM.
Reply With Quote
  #3  
Old 04-12-2013, 07:22 PM
DSA.audio's Avatar
DSA.audio DSA.audio is offline
Registered User
 
Join Date: Feb 2006
Location: hoodoo audio heaven
Posts: 1,334
by dual mono, do you mean that there are there separate boards and for right and left?
are there dual power supplies fed by the one cord?
__________________
.............................

the Mistick Krewe account is temp. disabled,


forgive the ressurection of DSA.audio please...

Last edited by DSA.audio : 04-12-2013 at 07:24 PM.
Reply With Quote
  #4  
Old 04-15-2013, 12:31 PM
SBS Designs SBS Designs is offline
Registered User
 
Join Date: Jun 2012
Posts: 64
Hope this answers

Quote:
Originally Posted by DSA.audio
by dual mono, do you mean that there are there separate boards and for right and left?
are there dual power supplies fed by the one cord?

your question

Both channels are on one board, side by side, but the circuits don't intermingle which is why the stereo seperation is so good on the SX-3.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:45 PM.


Powered by vBulletin Version 3.0.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
2006 Wave Music


© Wave Entertainment Group, Inc.