Dead output, should be pretty straight forward to find yourself no?
Just to double check the silly things first, you have checked the output with other cables and another input thus eliminating the amp and cable?
When you wiggle the xlr plug in the back you still get no sound?
Take the mixer apart, how is the XLR socket mounted? Board mounted or wires?
What's the solder joint look like?
If all of that is ok, trace back the signal, what's it going in to? any op-amps? bad looking components or solder joints?
Perhaps ask Jerome what's feeding the XLR out and look there with a scope.
Had the left output go on my Akai S-1100 recently (Was very hissy) and took about a week to find the faulty op-amp but I did have the schematics.
--The future scares me, any chance of a lift back to the past any one?--
Last edited by vinyl_junkie : 03-08-2014 at 03:49 PM.