10 New Sbs Electronics Hifi Amplifiers SBS Electronics Amplifier Line:
SBS Electronics Amplifier Line:
Details & Voicing of the SBS Electronics S series & M Series Amplifiers
The SBS Electronics S series  Stereo, & M Series  Mono Block series Amplifiers will be offered as a traditional power amp line with massive power supplies and storage Capacity.
The SBS Electronics HIFI amplifiers are voiced to sound Amazing, they are extremely fast, very dynamic with very wide frequency response, for a very open and musical sound. They are rated conservativly with true continuous Specs..
Transformer offerings:
The larger Stereo & Mono series SBS amplifiers will be available with Teroidal or EI Transformers at the clients request.
The Smaller S series amps for High freq devices such as compression drivers or Tweeters with Teroidal transformers only.
For Large SBS Electronics Amplifiers I will offer 4 SBS Electronics Mono Blocks, The M1,M2,M3 & M4 respectively.
Read Below The detailed specs on this amazing new SBS HIFI Amplifier line now, that are Now Available to order.
The S1 Series:
2RU
65 @8
100@4
Input Sensitivity 1 volt
The freq resp is from 10 hz to 100 khz ,
The Slew rate 100 v/us
The THD .02%
Damping Factor 100
Class AB output, true complementary class AB drive sections.
The S2 Series :
2RU
125@ 8
225@ 4
The freq resp is from 10 hz to 100 khz ,
Input Sensitivity 1.25
The Slew rate 100 v/us
The THD .02%
Damping Factor 100
Class AB output, true complementary class AB drive sections.
The S1 & S2 measure as the same Specs, power per ch & input sensitivity is the only difference.
The S3 Series :
3RU
275@ 8
500@ 4
The freq resp from 10 hz to 75 khz ,
Input Sensitivity 1.4
The slew rate 80 v/us
THD .03%
Damping Factor 200
Class AB output , true complementary class AB drive sections.
The S4 Series: ( pic shown below )
3RU
450@8
800@4
Freq resp from 10 hz to 60 khz ,
Input Sensitivity 1.4 volts
The slew rate 70 v/us
The THD .04%
Damping Factor 250
Class AB + variable supply output, fully Class A drive sections.
The S5 Series: ( pic shown below )
Pure class AB
300 watts @8 ohms per ch
600 watts @4 ohms per ch
1100 watts @2 ohms per ch
Slew Rate 80 v/us
THD .03%
Damp 400 ,
Freq resp 10hz to 75khz.
Input Sensitivity 1.4
3 RU
3yr parts and Labor Warrenty
The S6 Series: ( pic shown below )
Linear Class H,
600 @8 ohms per ch
1000 @4 ohms per ch
1500 @ 2 ohms per ch
Damp 300
Freq Resp 10 hz to 60k
THD .03
Slew Rate 70 v/us ,
Input Sensitivity 1.4
3 RU
The SBS Electronics M1  Mono Block Specs:
3RU
1200 watts per block @ 3 or 4 ohms
The freq resp from 10 hz to 75 khz ,
Input Sensitivity 1.4 volts
The slew rate 120 v/us
THD .03%
Damping Factor 200
Class AB output , true complementary class AB drive sections.
SBS Electronics M2  Mono Block Specs
3RU
Offered to be built for Desired load @ 3 or 4 ohms
2100 watts a Mono Block
Freq resp from 10 hz to 60 khz ,
The slew rate 105 v/us
The THD .04%
Damping Factor 250
Input Sensitivity 1.4 volts
Class AB + variable supply output, fully Class A drive sections.
The SBS Electronics M3  Mono Block Specs:
2200 watts into 4 ohms
Slew Rate 140 v/us
THD .03% ,
Damp 400 ,
Freq resp 10hz to 75khz.
3RU
The SBS Electronics M4  Mono Block
3000w into 4 ohms.
Slew Rate 130 v/us ,
.03% THD ,
Dampening Factor 300
Frequency Response 10hz to 60khz.
3 RU
SBS Electronics Amp Specs:
The power ratings of SBS Electronics S Series, The M1,M2, M3, M4 Mono Block series Amplifiers are true real world ratings, not rated @ 1K or from 20  20k, from full freq resp rated of ea amp..
If I was to rate the SBS Electronics Amp line as the industry does today with other amp brands @ 1k, or from 20 to 20K, the SBS S series, the M Series amplifiers would put out considerably more power per ch or per mono block
All SBS Electronics Products Hand made in the USA out of New York, with a 3 yr parts and labor warrenty
A FULL LINE IS NOW AVAILABLE
Last edited by soundmanshorty : 09082011 at 02:21 AM.
