Lid is shown in the vids below, comes with the brackets which I need to reatttatch
No 45RPM center hole adaptor, no box
It has had the pitch replaced before, but before it came into my studio
First video demonstates it working. 33 and 45 and start button work. Its got a Shure cart. The pitch works, but seems 'stiff' - you may be able to see in the video that the respective small 3 platter strobes are 'still' at c-3, c3.5 and c5.8 % pitch (as opposed to -3.3, 3.3 and 6.
The 0 strobe (The big one) stays still at 0 as it should (Hence I believe the quartz circuit is working, just the quartz light doesnt come on)
Few marks around the turnatble, a couple of screws are missing at the base. The popup light comes up but is stiff, poss needs oil. Tonearm seems fine. There is no white calibration tool.
Earth wire, AC cable and phonos intact.