View Single Post
  #3  
Old 10-04-2013, 03:35 PM
Captainjr Captainjr is offline
Registered User
 
Join Date: Dec 2006
Posts: 245
Mistick, good point but if you look real close the rivets are crushed a little different on the top RCA jacks then the bottom RCA jacks. I do not know why the print on the rear top RCA jacks is missing and the holes look drilled not punched when you enlarge the photo. The chassis is real clean but the BOZAK info on the top back right chassis corner is also missing. Before I offer I want to be sure I am getting the real deal. I noticed when you enlarge the front face photo that the AUX SELECT print is not proper looking.

Last edited by Captainjr : 10-04-2013 at 07:34 PM.
Reply With Quote