how to connect ground wire to DJR400
the stock ground wire clip on my technics 1210 doesn't fit on the DJR's post.
the post on the mixer is too big. has anyone solved this problem?
I dont have the tags on the end of 1200s, just bare wire. On the DJR400, i connect a terminal block, that is permanently connected. I can then screw into the terminal block any wire i need to earth.
if you have the male tags still on the 1200 s, and you want to keep them...
you could get a female counter assembly for the tags, and solder a short piece of wire to the end opposite your TT ground
you could also just snip them off, and add ones that fit the DJR
|All times are GMT -4. The time now is 07:06 AM.|
Powered by vBulletin Version 3.0.0
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
©2006 Wave Music